Understanding the distribution of bushmeat hunting effort across landscapes by testing hypotheses about human foraging

Mitigating the massive impacts of defaunation on natural ecosystems requires understanding and predicting hunting effort across the landscape. But such understanding has been hindered by the difficulty of assessing the movement patterns of hunters in thick forests and across complex terrain. We statistically tested hypotheses about the spatial distribution of hunting with circuit theory and structural equation models. We used a data set of >7000 known kill locations in Guyana and hunter movement models to test these methods. Comparing models with different resistance layers (i.e., different estimates of how terrain and land cover influence human movement speed) showed that rivers, on average, limited movement rather than serving as transport arteries. Moreover, far more kills occurred close to villages than in remote areas. This, combined with the lack of support for structural equation models that included latent terms for prey depletion driven by past overhunting, suggests that kill locations in this system tended to be driven by where hunters were currently foraging rather than by influences of historical harvest. These analyses are generalizable to a variety of ecosystems, species, and data types, providing a powerful way of enhancing maps and predictions of hunting effort across complex landscapes.     

Assessment of the effect of technical and management characteristics on the frequency of release from piping: An application to a gas storage facility

The assessment of the frequencies of release from piping due to losses of containment is an essential step in the preparing Safety Reports, drawn up as required by the so-called “Seveso” Directive. These are usually calculated starting from the frequencies of random rupture included in international databases and are not plant-specific, furthermore, the quantification of the effect of the safety management system of the facility is not easy. A simple and flexible approach quantifying technical and management characteristics of the plant has been proposed by Milazzo and co-workers in 2010; it is based on the modification of the frequency taken from literature, through the use of the percentages of failure causes actually possible in that plant, and the judgment about their management. The data about the failure causes are taken from the literature and modified by using corrective factors to adapt them to the industrial context. To make possible the application of the method to a large number of major-hazard industry types, some aspects of the approach needed to be improved; these have been identified during a development project coordinated by RINA Consulting, on behalf of Saipem, with the collaboration of the University of Messina. The improvement of the approach focused on two main points, the development of a method to calculate the corrective factors for the failure causes associated with corrosion and erosion phenomena and the strengthening of the methodology for the formulation of the judgment about the safety management. This paper illustrates the fully improved method, as well as an application to a typical gas storage plant.     

危险品道路运输风险分级指数法研究

危险品道路运输过程风险影响因素多,随机性和不确定性大,定量风险评价比较复杂,至今没有统一的风险评估模型.为了有效预防危险品运输事故和进行快速风险评估,基于运输危险品本身特性和相关的风险影响因素探讨了运输危险品现实风险分级指数法.该方法由危险品风险分级指数、路线影响因素和安全措施补偿因子3部分构成.危险品风险分级指数由危险品加权平均风险等级和运输危险品量、泄漏点与居民区距离以及危险品扩散因子等级确定.危险品加权平均风险等级涉及其健康危害性、可燃性、化学反应活性以及特殊危险性(氧化性和与水反应性)等级的确定.路线影响因素包含运输道路特征、气象条件、交通状况和影响人员分布4类.安全措施补偿因子为车辆、设备、容器、包装因子,人员素质因子和安全管理因子3类.该方法可对运输危险品的潜在风险进行快速分级,有利于采取有效的安全预防和控制措施,降低运输事故概率和沿线影响人员风险.     

城市天然气工程环境风险评价

结合广州、深圳、东莞、佛山等城市的天然气工程情况,对城市天然气工程的环境风险评价进行了讨论,并采用穆尔哈斯(Moorhowse)和普里恰特(Prichard)提出的热辐射预测模式和爆炸冲击波预测模式对城市天然气工程进行了风险评价.结果表明,如果发生天然气泄漏并引起火灾,假设在10 min以内,城市门站、调压站和城市高中压管道的火球对建筑物和设备的严重损害范围( A 级)最远距离分别为35.8 m、18.0 m和28.7 m,爆炸冲击波严重损害范围( C1 级)分别为距事故处54.8 m、27.8 m和44.4 m.最后从城市门站、调压站选址及输气管道选线、安全防范距离、作业过程中的风险控制与管理以及事故应急对策四方面提出了风险事故的防范措施与对策.     

基于SPA模型的煤矿瓦斯危险源风险评价

根据危险源理论和三类危险源的观点,采用集对分析(SPA)方法,进行了安全一事故集对的同异反分析,指出应采取措施控制不确定项,尤其要控制其中的第二类、第三类危险源才能使系统趋于安全状态;同时建立了煤矿瓦斯危险源风险评价模型,通过联系度的计算得出煤矿瓦斯的安全等级.研究表明,将集对分析方法应用于某煤矿瓦斯危险源风险评价,计算简单,结果较为精确、可靠,为不确定系统的评价提供了一条新思路.     

Dynamic-risk-informed safety barrier management: An application to cost-effective barrier optimization based on data from multiple sources

An integrated approach for performance assessment and management of safety barriers in a systemic manner is needed concerning the prevention and mitigation of major accidents in chemical process industries. Particularly, the effects of safety barriers on system risk reduction should be assessed in a dynamic manner to support the decision-making on safety barrier establishments and improvements. A simulation approach, named Simulink-based Safety Barrier Modeling (SSBM), is proposed in this paper to conduct dynamic risk assessment of chemical facilities with the consideration of the degradation of safety barriers. The main functional features of the SSBM include i) the basic model structures of SSBM can be determined based on bow-tie diagrams, ii) multiple data (periodic proof test data, continuous condition-monitoring data, and accident precursor data) may be combined to update barrier failure probabilities and initiating event probabilities, iii) SSBM is able to handle uncertainty propagation in probabilistic risk assessment by using Monte Carlo simulations, and iv) cost-effectiveness analysis (CEA) and optimization algorithms are integrated to support the decision-making on safety barrier establishments and improvements. An illustrative case study is demonstrated to show the procedures of applying the SSBM on dynamic risk-informed safety barrier management and validate the feasibility of implementing the SSBM for cost-effective safety barrier optimization.     

煤矿岗前人员不安全状态智能检测系统研究*—以红柳林煤矿为例

为从根本上降低煤矿从业人员实施不安全行为的概率,在充分考虑煤矿从业人员不安全个体状态是诱发其不安全行为的主要原因的基础上,设计开发一套矿工不安全状态智能检测系统。首先,对2007—2022年期间各高危行业安全事故调查报告和专家研究进行归纳,总结得出煤矿从业人员不安全状态的影响因素,构建包括生理状态、心理状态以及个体能力状态在内的3个一级指标和15个二级指标体系;其次,通过相应的表征模型对不安全状态影响因素进行深入剖析;最后,基于构建的从业人员不安全状态倾向数据库,建立煤矿岗前不安全状态智能检测系统。研究结果表明:在下井工作前对从业人员个体状态进行智能检测,能够实现矿工不安全状态“早发现、早干预”,能够有效地降低人因事故发生率,研究结果对煤炭行业安全管理具有重要的参考价值。     

浅析废烟气脱硝催化剂环境管理

随着"十二五"期间国家对氮氧化物排放的控制越来越严格,选择性催化还原(SCR)烟气脱硝技术被广泛应用于火电厂的脱硝工程。本文介绍我国目前废烟气脱硝催化剂的产生情况、存在的环境风险以及发达国家的管理经验,从而提出我国将废烟气脱硝催化剂纳入危险废物管理,推行危险废物经营许可证制度,加强产生和经营单位的日常监督管理,从而促进行业的健康可持续发展。     

我国防灾减灾领域学科发展及其专业设置——从学位管理制度谈起

我国高校在防灾减灾类人才培养中存在一些现实困境,如:灾害学的学科地位较低、防灾减灾类学科及专业设置不灵活、学校管理制度及其相关条例的约束等。从我国学位管理制度谈起,通过比较分析国内外高校专业设置与交叉学科发展情况,探讨我国防灾减灾领域学科发展及专业设置对防灾减灾人才培养造成的影响,并提出三点建议:一是加大我国学位管理制度的改革,确保落实高校办学自主权;二是对灾害科学的研究走向系统化、社会化,发展国内高等学校防灾减灾类专业本科教育;三是防灾减灾类专业课程设置从横向和纵向上都要体现综合和交叉的学科属性。     

车用燃料环保管理——《2013年中国机动车污染防治年报》（第V部分）

环境保护部日前发布《2013年中国机动车污染防治年报》,公布了2012年全国机动车污染排放状况。本期“研究成果展示”专栏以六篇形式连载。本文刊载关于车用燃料环保管理的内容,以飨读者。该年报指出。2012年,全国实施车用汽油国Ⅲ阶段标准,硫含量不超过150ppm。按照国家强制性标准《车用汽油》（GB17930—2011）要求,自2014年1月1日起,全国实施车用汽油国IV阶段标准,硫含量不超过50ppm。2012年,我国车用柴油生产和销售执行《车用柴油》（GB19147—2009）标准和《普通柴油》（GB252—2011）标准。按照规定,车用柴油硫含量不得超过350ppm,2013年7月1日后普通柴油硫含量将不得超过350ppm。在已发布第四阶段车用汽油标准（硫含量不大于50ppm）的基础上,由国家质检总局、国家标准委尽快发布第四阶段车用柴油标准（硫含量不大于50ppm）,过渡期至2014年底;2013年6月底前发布第五阶段车用柴油标准（硫含量不大于10ppm）,2013年底前发布第五阶段车用汽油标准（硫含量不大于10ppm）,过渡期均至2017年底。加快国内炼油企业升级改造,确保按照汽、柴油标准升级实施时间如期供应合格油品。2012年环境保护部发布的《关于加强储油库、加油站和油罐车油气污染治理工作的通知》指出,按照国务院批复的《重点区域大气污染防治“十二五”规划》要求,列入大气污染防治“重点控制区”的地区,应限时完成加油站、储油库、油罐车的油气回收治理;大气污染严重的地区可根据本地实际,提前完成油气污染治理工作。